MARSHALL Valve Power Amp Mod.9200 All original manual and  Tag. Voltage 220 Volts (or 110 Volts)

Like the EL34 50/50 the 100W + 100W EL34 100/100 utilises the 'industry standard' Marshall EL34 driven, valve power stage. When you hear the EL34 100/100 you will immediately appreciate this tonal heritage. An eye-catching and innovatively designed unit, it is packed with Marshall valve tone.
Just like expensive hi-fi amps, the EL34 100/100 is a Dual MonoBloc amplifier - meaning that each side (channel) of the stereo amplifier operates as a completely independent unit. Each channel features its own Gain and Presence controls and our highly specialised 'True Differential Inverter' circuitry, ensuring that the maximum integrity and pureness of its valve tone is maintained at all times. Each channel also has a remotely switchable 'Voice' switch which takes you from 'traditional' (Voice A) to 'modern' (Voice B) and will allow you to cut through any mix.


 EL84 20/20   EL34 50/50   EL34 100/100 

 Output (RMS)

20 + 20w 50 + 50w 100 + 100w

 Volume Control

1x stereo  1x per Channel   1x per Channel 

 Presence Control

1x stereo  1x per Channel   1x per Channel 

 Voicing Options

Resonance A/B A/B

 Remote Resonance Switching


 Remote A/B Switching


 Impedance Selection

 Line Level Output


 Link Output


 Dimensions (mm)

1U Rack
 (270mm Depth) 
3U Rack
 (330mm Depth) 
3U Rack
 (330mm Depth) 

 Weight (Kg)

5 19 20.5

 Footswitch (not supplied) 

PEDL-10008 PEDL-10008 PEDL-10008

 Power Amp Valves

4x EL84 4x EL34 8x EL34


1x ECC82 2x ECC83 2x ECC83

 Phase Inverters

2x ECC83 2x ECC81 2x ECC81


2x100W power amp featuring:
Front Panel(per channel):Volume Control,Presence Control,Voicing Switch.
Rear Panel: Input Jacks,Speaker Output Jacks,Impedance Selection Switch,Voicing Switch.
3 U rack
Weight 20,5 Kg.
Valve Complement:8 x EL34,2 x ECC81